Products Conveying

Trough Chain Conveyor

PETKUS offers flexible and modular trough chain conveyors for seed and grain silos, milling and compound feed systems as well as for malting plants. Dimensions and capacities can be individually assembled and adjusted. Durability is ensured by using hot-dip galvanized sheet steel and alloy chains. Capacities of 50 to 400 t / h with a density of 0.75 t / m ³ are possible for common types of grain at a speed from 0.5 to 0.65 m/s.

Characteristics
  • Folded and bolted construction with galvanized Z450 sheet steel construction50 to 400 t / h with a density of 0.75 t / m ³ are possible for common types of grain at a speed from 0.5 to 0.65 m/s
  • Flexible positioning of inlets and outlets
  • Large conveying distances of up to 70 m
  • Modular design with duct lengths of 500 mm, 1000 mm, 2000 mm and 3000 mm
  • Clamping station equipped with chain tensioner and spring damper
  • High resistance chain made of high strength steel and hardened bolts and bushings
  • High breaking load
  • Chain side wings with PE-UHMW removing platesChain side wings with PE-UHMW removing plates
  • Quieter, low-wear operation due to guide rails of PE-UHMW
  • Drive shaft with rotation control
  • Final outlet with overflow flap and sensor
    TK 200 TK 300 TK 400 TK 520 TK 650
Trough width, inside (mm) 190 300 400 520 650
Trough height, inside (mm) 320 440 580 690 920
             
Output¹ (t/h) 50 100 200 400 600
Chain speed (m/s) 0,5 0,5 0,5 0,5 0,5
Max. conveying distance² (m) 70 ² 70 ² 70 ² 70 ² 70 ²

¹ based on 0,75 t/m³
² with reinforced conveyor chain, otherwise max. 50 m